1 Meter Loop Antenna

Coax Loop with differential amplifier.

Differential LNA and Balun/Power Inserter Board.

Folds up for portable use and shipping.


This RECEIVE ONLY antenna comes with 100 feet of outdoor rated CAT6 F.P.A. cable, terminated in shielded RJ45 Jacks. A LNA and 2:1 balun with a power inserter, an RJ45 input and a BNC output board is also included. If you need more than 100 feet of cable, add 20 cents a foot for the overage at checkout. Or if you need less cable, deduct 20 cents a foot at checkout.

A user provided BNC cable connects to the Balun/Power Board to your receiver. The supplied FPA cable connects to the Balun/Power Board, and a user supplied 12-14VDC power source connects to the power plug. A demo of this antenna is providing signals to a websdr which can be listened to @ .

Shipping is included to the United States. Postage elsewhere will be quoted at time of order.

The antenna is made from RG213/U coax cable, the vertical supports are 1/2″ schedule 40 PVC water pipe, and the box containing the amplifier is a steel outdoor electrical box. Waterproof bulkhead glands are used to seal the coax entry points to the electrical box. A weep hole is drilled in the bottom of the electrical box to allow moisture to escape. The amplifier board is not encased in epoxy and is user accessible.

This is a great antenna for shortwave listening and diversity reception for Ham radio enthusiasts. It works very well with SDR radios and covers from DC through 30MHz. The antenna is broadband and does not require tuning or other adjustment to use.

The antennas are custom made by K7RHB and KA7U, so if you have special requirements, feel free to ask and we might be able to adjust it for you.

Please use the contact form for questions and inquiries.